Skip to content
Why Buy from Us? Click Here to Find Out!
Why Buy from Us? Click Here to Find Out!

TriActive USA Multi Bars

Original price $1,595.00 - Original price $1,595.00
Original price
$1,595.00
$1,595.00 - $1,595.00
Current price $1,595.00
Color: Green

For Quotes, simply add desired products to your quote request with the Add to Quote button. You can view your full request at any time by selecting the View Current Quote Request button on the sidebar. If you need assistance please call us at (888) 990-7508 or email Sales@Outdoorworkoutsupply.com.

 

 

The Multi-Bars are a versatile and essential piece of equipment used to perform a variety of stretching exercises, assisted pull-ups and push-ups.

This equipment is designed for individuals weighing up to 330 lbs.

  • Dimensions: 177”L X 8”W X 88”H
  • Color: Green or Blue
  • Bar Height: 27.5", 35.5" & 43.25"
  • Weight: 110 lbs
  • Assembly: Not Required

Warranty:

Limited 10-year warranty on steel posts, welds, bars and other steel parts on all units that are fully welded, with non-moving parts.

Limited 5-year warranty on steel posts, welds, bars and other steel parts for all units with moving parts.

Product Specification:

TriActive USA’s MBAR assumes three cross bars (3, 4, and 5 feet off ground on center) and four upright posts utilizing a slip fit tube that’s welded inside the cross bars and drilling holes for 3/8” bolts to secure the cross bars in place.

MBAR assumes usage of American standard size tubing, namely:

  • 3” x 3” square tubing x 11ga,
  • 1-1/4” OD round tubing x 11ga,
  • 1.5” Round Tube 11ga
  • ¼” hot rolled flat bar.

The part will have seven parts in total – 4 uprights and 3 cross bars.

TriActive USA Fitness Equipment does not include any of the following:

  • exposed cables
  • hydraulics 
  • plastic seating

Powder Coating Specification:

  • Powder coating thickness 6-8 mils. Coatings are tested for 1000 hours of salt spray resistance.
  • pre-treated
  • iron phosphate applied
  • zinc powder applied
  • functional powder applied
  • and final TGIC powder coat is applied to provide outstanding weathering capabilities.

General Assembly Instructions:

Assemble at locations where indicated with supplied hex bolts, washers, plastic security bases, and plastic security caps. It’s recommended to use a thread locking agent. 6 hex bolts, 12 washers, 12 plastic bases and caps, 12 nuts provided.

Product Downloads:

Product Specs

Installation Sheet

 

*Actual equipment may look different than shown due to frequent design upgrades.*